RESUCAT 212-31 series (LED UV)
RESUCAT® 212-31 is a Cationic UV curing printing ink for use by flexo printing with low odor and low migration.
RESUCAT® 212-31 can be used for print on Polyamide sausage casings and for print on food grade flexible packaging, where exceptional properties are required.
RESUCAT® 212-31 was originally developed for printing on polyamide sausage casings, optimized for curing by LED lamp at 395 nm.
The fully cured print achieves very high resistance properties, including heat-, frost-, oil & grease- and boiling- resistances.
The fully cured print can meet different demands, including indirect food contact.
Generate TDS
| Sub headline | LED UV curing Flexo Ink for meat casings |
|---|---|
| Performance |
|
| Substrates (Treated) |
|
| Additives & Thinners |
|
| Recommendations | Cationic inks are inhibited by water and amines, thus care must be taken for humidity / moisture and alkali (soaps etc.). See” RESUCAT® 212 Instructions for use”. |
| Shelf life & Storage | RESUCAT® 212-31 series should be used within 1 year from manufacture (Gold & Silver 6 months). It is recommended to store the product at a temperature between 5ºC and 30ºC. Do not expose ink to direct sunlight. Lightproof packaging should be restored a.s.a.p. after use. Never put used ink back in a bucket of fresh ink, store used ink in a separate container. |
| Daily cleaning | For manual cleaning of Anilox, rubber blankets, rollers, cylinders, vessels and other machine parts, use brushes or anilox pads. Use the retarder solvent, to avoid exposure and evaporation. |
| Compliances | Indirect food, Swiss, Nestle, Kosher, Halal |
| Packaging | Jar, Bucket, Drum, IBC |
