REDIVERS® 300 Promotor 5532
REDIVERS® 300 Promotor 5532 is a „Crosslinker”, which is added to alcohol-, Ester- and ketone based printing inks, in order to achieve excellent properties in the final print.
REDIVERS® 300 Promotor 5532 react with Carboxy- and Hydroxy-groups in the dried print. After 3-4 days storage at room temperature the print can be processed, full cure is achieved after ± 1 week.
Generate Technical data sheet
|Sub headline||Crosslinker added to alcohol-, Ester- and ketone based printing inks|
Promotor 5532 can be added up to 2 times.
The Promotor will hydrolyze less in ester/ketone based inks, therefore it is active for 8-12 hours, after which we recommend the ink is disposed of.
The Promotor will hydrolyze slowly in alcohol based inks, there-fore it is only fully active for 6–8 hours. We recommend that extra promotor is added after 6 hours.
We recommend mixing ink only for a few hours consumption and then continually add freshly mixed ink every 2-3 hours.
Use suitable protective gloves. You could use cotton gloves inside the gloves. Wear suitable goggles or face shield as pro-tection against splashes.
|Shelf life & Storage|
REDIVERS® 300 Promotor 5532 should be used within 2 years from manufacture.
It is recommended to store the product at a temperature between 5ºC and 30ºC.
|Performance||Excellent printing properties|
|Compliances||Indirect food, Swiss, Nestle, Kosher, Halal|
|Packaging||Jar, Bucket, Drum, IBC|