REDIVERS® 300 Thinner 0062-1
REDIVERS® 300 Thinner 0062-1 is used for solvent-based printing ink.
Intended use for REFLEX, RESTINE, RETURIN and REVERSAL series.
Thinners with different compositions are used to adjust the viscosity of the inks.
Additionally the thinner may influence the curing speed and in some cases improve the adhesion on difficult substrates.
All thinners, supplied by Resino, are the most pure technical quality, to assure there is no interference with curing in 2-component ink systems.
Alternative thinners can be made upon request.
Generate Technical data sheet
|Standard Products||30% Ethanol, 22% N-propanol, 40% Ethoxypropanol, 8% Methoxypropanol.|
|Recommendations||Use suitable protective gloves. You could use cotton gloves inside the gloves. Wear suitable goggles or face shield as protection against splashes.|
|Shelf life & Storage|
REDIVERS® 300 Thinner 0062-1 should be used within 2 years from manufacture.
It is recommended to store the product at a temperature between 5ºC and 30ºC.