REDIVERS® 300 Thinner 0088
REDIVERS® 300 Thinner 0088 is used for solvent based printing ink.
Intended use for REFLEX, RETURIN and REVERSAL series.
Thinners with different compositions are used to adjust the viscosity of the inks.
Additionally the thinner may influence the curing speed and in some cases improve the adhesion on difficult substrates.
All thinners, supplied by Resino, are the most pure technical quality, to assure there is no interference with curing in 2-component ink systems.
Generate Technical data sheet
|Sub headline||For solvent based printing ink|
|Standard Products||66% N-propanol and 34% N-propylacetate.|
|Recommendations||Use suitable protective gloves. You could use cotton gloves inside the gloves. Wear suitable goggles or face shield as pro-tection against splashes.|
|Shelf life & Storage|
REDIVERS® 300 Thinner 0088 should be used within 2 years from manufacture.
It is recommended to store the product at a temperature between 5ºC and 30ºC.