RESTINE® 173-03 series
RESTINE® 173-03 series can be used as 1-Component ink for print on both absorbing and non absorbing substrates.
RESTINE® 173-03 series is an ester based printing ink for gravure printing.
RESTINE® 173-03 series is highly pigmented, exhibit good gloss and fast solvent release.
RESTINE® 173-03 series was originally developed for printing on PVC adhesive tape.
The fully cured print achieves very high resistance properties and can meet different demands incl. indirect food contact.
Generate Technical data sheet
|Sub headline||Gravure ink for adhesive tape|
Formanualcleaning of Anilox,rubber blankets,rollers,cylinders, vessels and othermachine parts, use brushes or anilox pads.
Use the retardersolvent,to avoid exposure and evaporation.
For easy handling use REDIVERS® 300Cleaning gel 2200.
To achieve boiling sterilization, grease and high heat resistances it is necessary to add 10% REDIVERS® 300 promotor 5032 to the ink.
See” RESTINE® 173 Instructions for use”.
|Shelf life & Storage|
RESTINE® 173-03 series should be used within 2 years from manufacture.
It is recommended to store the product at a temperature between 5ºC and 30ºC.
|Substrates||Aluminum folis, Cellulose, Collagen, Metallized foils, PVC, Treated OPP/PP, Treated PA/NYLON, Treated PET/PE, Fibrous|
|Additives & Thinners||REDIVERS® 300 Accelerator 0079, REDIVERS® 300 Promotor 5032, REDIVERS® 300 Retarder 0071|
|Performance||Deep freeze resistant, High flexibility, Good adhesion, Oil, grease & chemical resistant|
|Compliances||Indirect food, Swiss, Nestle, Kosher, Halal|
|Packaging||Jar, Bucket, Drum, IBC|