RESUCAT® 210-13K series
RESUCAT® 210-13K is a Cationic UV curing flexo printing ink used for print on Polyamide meat casings and food grade flexible packaging, where exceptional properties are required.
RESUCAT® 210-13K was originally developed for printing on polyamide meat casings with low odor and low migration.
RESUCAT® 210-13K is cost optimized, providing value for money
The fully cured print achieves very high resistance properties, including heat-, frost-, oil & grease, boiling and sterilization resistances.
The fully cured print can meet different demands, including indirect food contact.
Generate Technical data sheet
| Sub headline | UV curing Flexo Ink for meat casings |
|---|---|
| Daily cleaning | For manual cleaning of Anilox, rubber blankets, rollers, cylinders, vessels and other machine parts, use brushes or anilox pads. Use the retarder solvent, to avoid exposure and evaporation. For easy handling use REDIVERS® 300 Cleaning gel 2200. |
| Recommendations | Cationic inks are inhibited by water and amines, thus care must be taken for humidity / moisture and alkali (soaps etc.). See” RESUCAT® 210 Instructions for use”. |
| Shelf life & Storage | RESUCAT® 210-13K series should be used within 1 year from manufacture (Gold & Silver 6 months). It is recommended to store the product at a temperature between 5ºC and 30ºC. Do not expose ink to direct sunlight.Lightproof packaging should be restored a.s.a.p. after use. Never put used ink back in a bucket of fresh ink, store used ink in a separate container. |
| Substrates | Aluminum folis, Metallized foils, Treated OPP/PP, Treated PA/NYLON, Treated PET/PE |
| Additives & Thinners | REDIVERS® 300 Additive 2519, REDIVERS® 300 Antiespumante 0147, REDIVERS® 300 UV-Cleaner 0081-1, REDIVERS® 300 UV-Thinner 0143 |
| Performance | Boiling & Sterilization resistant, Low migration, Very good adhesion, Low cost |
| Compliances | Indirect food, Swiss, Nestle, Kosher, Halal |
| Packaging | Jar, Bucket, Drum, IBC |
