RESUCAT® 210-29 series
RESUCAT® 210-29 is a Cationic UV curing flexo printing ink used for print on Polyamide sausage casings and food grade flexible packaging, where exceptional properties are required.
RESUCAT® 210-29 was originally developed for printing on polyamide sausage casings with low odor and low migration.
RESUCAT® 210-29 was originally developed for printing optimized for curing by LED lamp at 395 nm. As it is also curing well under regular Mercury lamps this inks series is considered a dual-cure ink
The fully cured print achieves very high resistance properties, including heat-, frost-, oil & grease, boiling and sterilization resistances.
The fully cured print can meet different demands, including indirect food contact.
Generate Technical data sheet
| Sub headline | LED UV curing Flexo Ink for meat casings |
|---|---|
| Daily cleaning | For manual cleaning of Anilox,rubber blankets,rollers,cylinders, vessels and othermachine parts, use brushes or anilox pads. Use the retardersolvent,to avoid exposure and evaporation. For easy handling use REDIVERS® 300Cleaning gel 2200. |
| Recommendations | Cationic inks are inhibited by water and amines, thus care must be taken for humidity / moisture and alkali (soaps etc.). See” RESUCAT® 210 Instructions for use”. |
| Shelf life & Storage | RESUCAT® 210-29 series should be used within 1 year from manufacture (Gold & Silver 6 months). It is recommended to store the product at a temperature between 5ºC and 30ºC. Do not expose ink to direct sunlight. Never put used ink back in a bucket of fresh ink, store used ink in a separate container. |
| Substrates | Aluminum folis, Metallized foils, Treated OPP/PP, Treated PA/NYLON, Treated PET/PE |
| Additives & Thinners | REDIVERS® 300 Antiespumante 0147, REDIVERS® 300 UV-Cleaner 0081-1, REDIVERS® 300 UV-Thinner 0143, REDIVERS® 300 Additive 1729 |
| Performance | Boiling & Sterilization resistant, Low odor and low migration, Very good adhesion, Fast LED cure |
| Compliances | Indirect food, Swiss, Nestle, Kosher, Halal |
| Packaging | Jar, Bucket, Drum, IBC |
